 4119 Waterproof Probe
This probe is designed to be immersed in water or to be used wherever heavy duty construction and a tubular probe design are needed. Probe sheath diameter is 1/4 inch. 4119 Part Number Format 4119-3-100-RN-PT138W-( )-( )
Model Number_______________________________________ 4119
Sheath Length in Inches____________________________________ 3
Cable Length in Feet_________________________________________ 100
Cable Style- from Options List _____________________________________ RN
Sensor Part Number- from Sensor Section-TC not available _________________ PT138W
Options- from Options List ___________________________________________________ ( )-( ) Options- should be specified in alphabetic order. Cables- Water-blocked cable is also available for deep water applications. Contact us. RN 18-xSJO, rubber insulation, neoprene jacket. Number of conductors depends on sensor type. RNH 18-4SO, rubber insulation, heavy duty neoprene jacket. RNS 18-4SJO, rubber insulation, braid shield, neoprene jacket. Connectors In addition to the connectors shown here, this probe can be ordered with molded underwater connectors attached.
Because of the large variety of such connectors, we request that you contact us to discuss your needs.
If a connector and mating connector are specified, the one designated first in the probe part number will be installed on the cable and the second will be supplied loose. All mating connectors are in-line style and include hardware. AMP Microphone 4 contact male (Switchcraft A4M or equal).
AMP-1 Female mates with AMP. SP Spade Lugs #8 spade lugs. Miscellaneous Options BL Bent Sheath
DU Dual Sensor
PT Pointed Tip | A single bend, to 90° maximum, is placed in the probe sheath. Specify BLxx,Y with xx indicating the distance from the probe tip to the centerline of the bend and Y indicating the bend angle relative to the probe's centerline. Refer to 4150 Options and Drawings for limitations.
Two electrically isolated sensors, in two wire configuration, are installed in the probe sheath. Recommended for TH sensors only.
Sheath tip is pointed, to allow penetration into non-rigid materials. |
Connectors In addition to the connectors shown here, this probe can be ordered with molded underwater connectors attached. Because of the large variety of such connectors, we request that you contact us to discuss your needs. If a connector and mating connector are specified, the one designated first in the probe part number will be installed on the cable and the second will be supplied loose. All mating connectors are in-line style and include hardware. AMP Microphone 4 contact male (Switchcraft A4M or equal).
AMP-1 Female mates with AMP. SP Spade Lugs #6 spade lugs. Miscellaneous Options DU Dual Sensor Two electrically isolated sensors, in two wire configuration, are installed in the probe tip.
Recommended for TH sensors only.
 | 
4120 Waterproof Probe