 42000 Series Products
This is a group of standard accessories. All 42000 Series products should be ordered using the prefix 42. For example, 42CET24 tube. Closed-End Tube CET12 These are 1/4 inch diameter by .020 inch wall 316 stainless steel sealed-tip tubes which
CET24 the user can cut to length on site. Dimensions shown are the standard lengths in inches.
CET36
CET48
Spring-Load Devices
SL3/16 Spring-Load
SL1/4 Spring-Load
SLA Spring-Load Assembly
ESL1, ESL3, or ESL6 Spring-Load Assembly
OSD7/32 and OSD1/4 Spring-Load Assemblies
OSS7/32-1/8, or -1/4 OSS1/4-1/8, or -1/4 Spring-Load Assemblies |
Adjustable stainless steel 'gripper' type spring is used to spring-load any 3/16 inch diameter probe. Sold in packages of 10 pieces.
Adjustable stainless steel 'gripper' type spring is used to spring-load the CET tube or any 1/4 inch diameter probe. Sold in packages of 10 pieces.
Non-adjustable drop-on spring assembly is used to spring-load the CET tube or any 1/4 inch diameter probe. Sold in packages of 5 pieces.
This assembly, available in 1, 3, or 6 inch mated lengths, is designed to be a transition fitting between a thermowell and nearly any connection head. Spring-loading of a CET tube or a 1/4 inch probe is independent of the internal construction of the connection head.
Double-ended 1/2NPT male 316 stainless steel transition fittings provide spring-loading and, by the use of Viton â o-rings, a low pressure fluid seal. Nuts and spacers are brass. Use with 7/32 or 1/4 inch diameter probes to 200 ° C.
Single-ended male stainless steel fittings, available in 1/8 and 1/4NPT sizes, provide the same sealing and spring-loading function as the OSD series assemblies.
|
Compression Fittings
C1/8-1/8,-3/16, or -1/4
C1/4-1/8,-3/16, or -1/4
C1/2-1/4 only
TF1/8, TF3/16, TF1/4
NY1/8, NY3/16, NY1/4
HC
Nipples And Unions
E1, E3, E6
P Union
|
316 stainless steel bored-through male compression fittings, 1/8, 1/4, or 1/2NPT male, are for use on 1/8, 3/16, or 1/4 inch diameter probes and tubes. Fittings are supplied with one piece stainless steel ferrules.
TFE ferrule for use with the compression fittings listed above, or for the HC fitting below.Ferrules are ordered by probe or tube diameter and allow re-positioning and re-sealing of the probe. Sold in packages of 5 pieces
Nylon ferrule for use with the compression fittings listed above, or for the HC fitting below. Ferrules are ordered by probe or tube diameter and allow re-positioning and re-sealing of the probe. Sold in packages of 5 pieces
Double-ended all 316 stainless steel transition fitting contains a ferrule and nut to p rovide a compression seal on a 1/4 inch diameter probe or tube.
304 stainless steel nipples, 1/2NPT by 2, 4, and 7 inches length.
Use as transition fittings between thermowells and connection heads. 1/2NPT 304 stainless steel union supplied with a 304 stainless steel close nipple. |
|
