 41000 Series Probes
The drawings and table provide descriptions and ordering information. All these styles have upper temperature limits which are defined by the lower of either the lead wire's or the sensor's temperature limit. 41000 Series Part Number Format 41031-PT138W-7.50-RT-36-SP-( )-( ) Model Number________________________________ 41031
Sensor Part Number- from Sensor Section ________________ PT138W
Sheath Length in Inches- NA if length not applicable ________________ 7.50
Lead Style- from Lead Style List and Table _____________________________ RT
Lead Length in Inches_________________________________________________ 36
Lead Termination/Connector- from Connector List______________________________ SP
Options- from Options List and Table __________________________________________ ( )-( ) Lead Styles available for platinum, thermistor, or thermocouple sensors. IP (PT, TH)
IT (PT, TH)
FEP (TC)
OF (TC)
PFA (TC)
PUT (PT, TH)
RF (PT)
RP (PT, TH)
RPS (PT, TH)
RT (PT, TH)
RTS (PT, TH) | Individual, #26 to #30AWG stranded, PVC insulation, 125°C.
Individual, #26 to #30AWG stranded, TFE insulation, 250°C.
Thermocouple, #24AWG solid duplex , FEP insulation, 200°C.
Thermocouple, #20 or #24AWG solid duplex, fiberglass insulation, 480°C.
Thermocouple, 24AWG solid duplex, PFA insulation, 250°C.
Cable, #24AWG stranded, foil shield, polyurethane jacket, 125°C.
Cable, #26AWG stranded, fiberglass jacket, 360°C.
Cable, #22AWG stranded, PVC jacket, 125°C.
Cable, #24AWG stranded, foil shield, PVC jacket, 125°C.
Cable, #26AWG stranded, PFA jacket, 250°C.
Cable, #26AWG stranded, braid shield, TFE jacket, 250°C. |
Connectors Only thermocouple style connectors may be specified for attachment directly to the probe sheaths, and only to tubular styles. Specify NA in the lead style and lead length locations. Refer to Model 4150 Connectors for complete descriptions. If a connector and mating connector are specified, the one designated first in the probe part number will be installed on the probe or cable and the second will be supplied loose. All mating connectors are in-line style and include hardware. AMP or AMP-1
MC or MC-1
MFP or MFP-1
MS or MS-1
SP
SPL
SRP or SRP -1 | Microphone type, male or female 4 contact, for PT or TH sensor
Thermocouple type, uncompensated male or female 3 contact, for PT sensor.
Thermocouple, miniature male or female 2 contact, for TC sensor.
Military type, male or female 4 contact, for PT or TH sensor.
#6/#8 spade lugs for PT or TH sensor.
#8 compensated spade lugs for TC sensor.
Thermocouple, standard male or female 2 contact, for TC sensor. |
Options- specified in alphabetic order. Refer to 4150 Options and Drawings for complete descriptions. AF Armor Fitting
B Armored Cable
C Compression Fitting
R Strain Relief Spring | Adjustable spring-loading assembly for use with option B.
Flexible armor. For use on 4103x, 4105x, 41066, 41083, or 4109x styles only.
Process fitting. For use on 4103x, 4105x style probes only.
Cable protection device. Not for use on 41010, 41012, 41081, or 41085. |
Use this table to determine compatibility of probe styles, sensors, and leads. Read horizontally from a model number to determine which sensor and lead style can be used. Lead styles can be used only with the sensors listed below them. Compatible configurations are indicated by shaded blocks. Numbered notes further define choices. For example, the 41012 is available only with a platinum wirewound sensor and only with IF or IT leads, while the 41030 is available with any sensor and any lead style. 
|
